Rudder 2hrs

Sanded and fit all the parts for the other side.  Test fit and glued them in place. Filled in a few gaps

Fin 1hr

Cut and sanded a few pieces.  Matched up the cap strips with the rudder.

Fin 1.5hrs

Started the same process for the fin.

Rudder 3hrs

Sanded the gussets and fit them in place.  Cut the cross members and glued everything.

Rudder 1hr

Turned paper into plywood

Rudder 2.5hrs

Marked up and cut out templates for the gusset plates. Sanded down the ends of the main beam and transferred some of the gussets on the plywood.

Rudder .5hrs

Cut more blocks to "clamp" the beams in place.